|Contacta RL-Tape is flat copper tape designed to be placed under flooring when installing large area loops. When it can be used it is a much easier and more practical solution than cable.
The Contacta RL-Tape comes as a 100m reel and its insulation film can be soldered through. It is available in three different widths depending on your installation requirements - 10mm, 12.5mm and 25mm. If you're not sure which width you require then please get in touch with our sales team who'll be happy to help - email@example.com
It's also good practice to cover your copper tape with Warning Tape to highlight to other contractors that there is an installed loop present and that they should avoid damaging it.
Composition - Copper 99.5% (minimum)
Density - 8.9g/cm³
Melting Point - 1083°C
Electrical Conductivity - 58m/ohm mm² at 20°C (100%IACS)
Electrical Resistance - 0.01741 ohm mm²/m at 20°C
Hardness - 50/60 HV
Copper Section - 1.25mm²
Insulation Film Specification
Density - 1.36g/cm³
Tensile Strength - 200N/mm²
Elongation - 60%
Temperature rating (continuous use) Melting Point - 160°C
Breakdown Voltage - 7KV